Author Archives: Ozone Pure Water

What are the results of chlorine in water and health effects to humans? 

There is chlorine in the water of swimming pools. So, if you have ever swum in a swimming pool, there’s a good chance you swallowed some water. You may have felt a little sick to your stomach after a long day in the pool, but it wasn’t enough to be harmful. 

In the 1800s, it was discovered that the water people were drinking was making them sick. Cholera, dysentery, and typhoid were discovered to be waterborne diseases that were causing many of the illnesses. This is why chlorine was added to minimize the rates of those getting sick from drinking water. While the initial introduction of chlorine in water as a disinfectant did lower the rates of disease in city-dwellers safely, if it was not diluted enough, even being non-toxic, that chlorine in water had harmful effects, 

Still today, ingesting too much chlorine in the water from the tap can have several harmful health effects because of the THMs (trihalomethanes) that can occur. THMs are the results of tiny particles forming in chlorinated water, a chemical compound that causes the following: 

• Asthmatic Symptoms: Exposure to chlorine in water of swimming pools has shown an association with increased symptoms of asthma in swimmers, including swimmers that never had any indication of asthma before. Even the water you bathe in, there is chlorine in water that is absorbed into your skin and the chlorinated steam is breathed in as well, both aggravating asthmatic symptoms.
• Food Allergies: Chlorine in water has been proven to create a food allergy effect because of the dichlorophenols found in the water. Dichlorophenols are also found in pesticides. Some participants with a high level of dichlorophenols during studies were noted to have the highest amount of food allergies. The studies were performed with the dichlorophenols in pesticides, not chlorinated water, but the effects were similar.
• Congenital Abnormalities: In Taiwan, approximately 400,000 individuals were part of a study that found women exposed to trihalomethanes in the chlorine in water while pregnant at a higher rate of giving birth to children with birth defects like a cleft palate, ventricular septal defects, or a hole in the heart that affected their brain development.
• Cancer: THM products found in chlorine in water was discovered to be a potential for contracting cancer of the bladder and rectum in a 1995 study. Chlorine in water was said to have accounted for 5,000 cases of bladder cancer and 8,000 cases of rectal cancer in the United States annually. A slight connection between carcinogenesis and chlorine in water was found possible but the link wasn’t confirmed and is still being studied. 

Why use chlorine in water treatment? 

For all the bad things that chlorine in water can cause, it comes from a natural product, ordinary salt, and is an essential mineral. It has improved, even saving billions of lives. Chlorine in water is essential as a chemical building block that makes water safe for consumption. From the food and water we consume to the medications we take, even our cellphones and computers depend on chlorine. 

If not for chlorine in water, we would still have people dying from cholera, dysentery, and typhoid today. So, when we wonder, what is chlorine in water for anyway, it eliminates the algae and other aquatic life that we don’t need to consume by being added to raw water. Otherwise, the microorganisms that are healthy for human consumption can also be found in that raw water with pathogens that are not good for human consumption. 

Too much chlorine in water is determined by what methods? 

So we know simply by swimming in a pool that chlorine is needed to disinfect the water. It is also used for disinfecting emergency water supplies. Today, it is considered to still be the best and safest way to make water safe for consumption. However, as we mentioned in the beginning, too much of a good thing can be bad for you. 

This means that if there are illnesses happening in your home, then testing the amount of chlorine in water is needed. A quick and simple way is with a DPD indicator test (diethyl paraphenylene diamine) a comparator. One tablet of DPD added to a water sample will turn the water red. 

The level of the color is measured against a chart of standard colors that give us the concentration level of chlorine in water. The deeper color of red, the higher the concentration of chlorine in water.

Do we know how chlorine dissolves in water?

Chlorine in water can be removed by an activate charcoal filter. The surface of the charcoal will absorb the chlorine ions as the water runs through. 

What happens when chlorine water is exposed to sunlight?

With exposure to sunlight, chlorine in water reacts by form HCIO (hypochlorous acid) which breaks down into hydrochloric acid & oxygen gas. The result is the colorless and odorless gas of oxygen and hydrochloric acid.

How long does a carbon water filter last?

You have plenty of reasons to pay attention to the lifespan of your carbon water filter. You want to be certain the water filter you’re using is doing its job, but you don’t want to purchase a carbon filter for your water if you don’t need it. 

As a starting point to figure out how long a carbon water filter will last, look at the information provided to you by the seller. Many will give you a basic idea of its lifespan. This includes how many gallons you can expect it to filter safely and about how many months you’ll be able to use it. It’s also important to realize the lifespan of a carbon water filter will change based on the contaminants in your water. Those with poor water conditions will want to replace their water filter more often. 

What does a carbon water filter remove?

Speaking of contaminants, you may already be wondering exactly what a carbon water filter can remove. These filters are highly effective and can get rid of many common impurities found in water. This includes chlorine and chlorine by-products, which are often added to water. Carbon water filters remove various herbicides and pesticides as well for improved safety overall. On top of all this, they are highly effective at removing sediment and other particles that can be found in water. 

What happens if you don’t change a water filter?

Everybody can get a bit lazy when it comes to taking care of basic household tasks, and changing the water filter is no exception. However, it’s a good idea to set a reminder and make sure you change your water filter when it’s time. The way a carbon water filter works means it will not work as well over time. 

How does a carbon water filter work?

A carbon water filter works by pulling in a variety of contaminants. Over time, it can become filled with too many contaminants to work properly. This can keep it from working at all, which means your carbon water filter system isn’t doing its job. 

How a Carbon Water Filter Works

There is one important word to remember when it comes to how a carbon water filter works: adsorption. And no, that’s not a typo. Adsorption is a different process from absorption, forcing contaminants to cling to the filter like Velcro. 

You should also remember that different types of carbon can be used in carbon water filters. The type of carbon can make a big difference in the way a filter works. Types of carbon found in filters include: 

• Granular activated carbon 
• Carbon block
• Radial flow carbon

Is a carbon water filter safe?

Have you ever wondered whether carbon water filters are really safe to use? If so, here is one important thing to remember. Not only are carbon water filters completely safe to use, they can also make your water much healthier overall. While they remove common impurities, they won’t remove important minerals such as calcium and magnesium. 

Will a carbon water filter remove lead?

Unfortunately, lead is still a common concern when it comes to the safety of the water we use. It is just one of the reasons so many people now use carbon water filters in their homes. However,  not all carbon water filters remove lead. Only carbon water filters made with the right type of carbon in the right amount can help ensure your water is entirely lead-free. 

Can a carbon water filter be cleaned?

One of the great things about carbon is how durable it is. This durability means you can easily clean a carbon water filter if needed. To do so, simply turn off the water filter system and remove the water filter from its housing. After that, soak it in distilled water for about a half-hour, shake off any debris on the filter, and give it a good rinse and wipe it down. It can then be put back into place without any need for drying. However, remember that even with cleaning, a carbon water filter will not work as well over time. You should only clean a water filter two or three times before replacing it. 

A whole house water treatment system, often referred to as the point-of-entry tap. This system is installed at the main water line before it enters your home. From there, the water filtration system benefits are numerous. Take a look what a whole house water treatment system can offer your family: 

1. Constant safer drinking water. With a whole house water treatment system, you can be sure that the water coming into your home will be healthier and safer tap water and  even better than bottled water. Unfiltered water from treatment centers still has a level of lead in addition to the chemicals they add like chlorine and fluoride. A whole house water treatment system will remove those things and more than 2,000 other impurities and toxins
2. Environmentally Friendly. A whole house water treatment system  will eliminate your share of the fifty billon plastic water bottles that ended un in American landfills last year. Did you know it takes up to 450 years for a plastic water bottle to disintegrate? 
3. Minimize skin conditions. A whole house water treatment system  will remove things like chlorine, fluoride, and other heavy metal substances are known to aggravate eczema, psoriasis, and other skin conditions.  
4. Save money. For a household that keeps bottled water around, having a whole house water treatment system will save you big money. With a household of 4 drinking 3 bottles of water each day, you’re spending at least $700 a year in bottled water. A whole house water treatment system can cost your up to $500 and nothing more other than replacing the filter every so often, usually less than $50, and your usual water bill. 
5. Minimize plumbing repair bills. With a whole house water treatment system , your plumbing bills will be minimized because the things that damage plumbing will be filtered out. Those chemicals, heavy metals, and minerals that aren’t good for you, aren’t good for the plumbing system in your home either. Think beyond the faucet and consider the damage happening to your dish washer, ice maker, washing machine, even the garbage disposal. 
6. Disaster preparedness.  When the city or county has sewer lines bursting, it leaves your plumbing vulnerable for contamination. However, with a whole house water treatment system, your water is protected! 
7. Soap saver. An whole house water treatment system does much of the same things that a water softener does, so you won’t need to double up on the soap for baths, cleaning, or laundry. The minerals that will make water hard is prevented by a whole house water treatment system. 
8. Better tasting drinking water. A whole house water treatment system will remove elements that is causing your drinking water to smell bad and taste bad. The bacteria, chlorine, and lead are removed, giving you healthy, purified, safe water with lower pH levels. 
9. Gastrointestinal disease risk reduced. There are many parasites found in unfiltered water along with many microscopic organisms. With a whole house water treatment system, those things are removed and minimizes the possibilities of your family suffering with aggravated  digestive and  intestinal problems.
10. Remove deposits of soap scum from clothes. With a whole house water treatment system , the chemicals in your tap water that leave soap scum deposits and residue are gone. This eliminates the possibilities of allergies and  rashes forming. 

Do whole home water filters work, and what is the best water filtration system?

A whole house water treatment system can come in an assortment of filter media. Choosing from the carbon filter, the reverse osmosis, or the advanced next-generation filter technology.  The carbon-based, 3 stage whole house water treatment system  is the most economical choice from the point of purchase to the maintenance factor. 

Most carbon-based whole house water treatment system can be found for under $800, and you’ll get up to 300,000 gallons from it before the main tank should be replaced. This will give a household of 4 about 3 year of use before the replacement.  

What’s the difference between a water softener and water filtration system?

The difference between water filtration system vs water softener is what they do.  The water filter system is going to remove contaminants from the water coming you’re your home, giving you safer water to consume. A  water softener will remove the minerals that cause water to be hard and leave scales and scum behind. from the water that causes hardness and scale.

Will Ozonators kill bacteria?

Through case studies, it has been confirmed that ozonators eliminate both inorganic and organic material, ending the life of fungi, microorganisms, and viruses. Viruses such as MRSA are eliminated with ozonators, as well as destroy the SARS coronavirus with ozone gas. While SARS is similar to the COVID 19 virus, Ozonators have not been proven to eliminate the bacteria and germs that are linked to the latest cause of today’s pandemic. 

Will ozone kill mold?

Ozonators, also referred to as ozone generators, are used for killing bacteria, mildew, and mold by professionals. When needed to blast or shock treat an area, Ozonators are used commercially, such in mold remediation, and in renovation and restoration projects. 

Ozonators are sold to consumers as an air cleaner, air ionizer, or air purifier that will disinfectant or deodorize a room in their home, or a whole house. For commercial purposes and industrial purposes, ozone is required in a high concentrated level and Ozonators should only be used in unoccupied spaces. Applications where Ozonators are used include: 

• Mold Remediation – Mold spore and physical contact is required in most mold treatment processes as the ozone travels through the air and permeable materials. Because ozone in a high concentration can permanently kill mold, Ozonators or ozone generators are common pieces of equipment for contractors working mold remediation. Air scrubbers and commercial humidifiers are used in combination with Ozonators to provide an effective solution to mold remediation.
• Smoke and Odor Removal – Ozonators are used for removing fire and tobacco smells as well as other indoor odors. The device changes the composition of smoke and odorous molecules, then dissipates the pungent smells.

Are Ozonators dangerous?

The answer will depend on who you ask. Manufacturers of Ozonators or ozone generators see these as air purifiers for indoor spaces and their marketing declares them to effective and safe. As more of us become concerned with the air we breathe, indoors and outdoors, Ozonators have increased in popularity. 

For a homeowner that is seeking a way to sanitize the air in their home, remove cooking or tobacco odors, Ozonators are helpful in these situations for occupied spaces like the bedroom, living room, or kitchen.  When manufactured by the EPA and OSHA guidelines, they are perfectly safe. 

Do Ozonators really work?

Most homeowners will tell you yes, they work and are helpful in cleaning the air in their home. However, if you are still uncertain that Ozonators are the way to go for you, there are other methods that are effective and simple for cleaning the indoor air pollution in your home: 

• Remove and replaced materials and products that cause indoor air pollution
• If no replacement material or  product is available, store the polluting items elsewhere
• If removing the source isn’t possible, reduce its strength
• Do not allow smoking in your home.
• Clean moist and wet  surfaces frequently to prevent bacterial and mold growth.
• Fix plumbing leaks promptly and allow the area to completely dry before sealing it off.
• Keep bathroom doors closed and make sure clothes dryer is vented outside.

Are pool Ozonators worth it?

Ozonators and pools are not a recommended combination. Because Ozone has a short lifespan and cannot be stored for use later, Ozonators are not an ideal or practical device for a home with a swimming pool. Ozonators to have the potential for good performance in eliminating odors inside the home though, but when it comes to the contaminants related to swimming pools and those in the pool, there can be dangerous. 

How is chlorine in water harmful to us if it disinfects it?  They have found a relationship between cancer and chlorine in studies by the U.S. Council of Environmental Quality. Those who drink chlorinated water have a 93% higher risk of cancer than those who don’t have chlorinated water. Therefore, it has become important for many areas to have a water chlorine removal process in the water purifying systems.

Other ways that chlorine has been found to be harmful to humans is:

A Children’s Health Hazard

Different studies have found that consuming chlorinated water and otherwise long-term exposure can increase the chances of asthmatic attacks, particularly in children that have weak or underdeveloped airway systems. It has also been related to asthmatic issues in adults with the following symptoms being noted after showering:

• Mild nose and throat irritation
• Sneezing
• Weak coughing
• Tightness in chest

Now we have chlorine removal water softener available to us to make water safer for consumption. The process uses GAC (granular activated carbon) to remove chlorine and water chlorine removal when added to a water softener resin bed at the preliminary stages of softening hard water.

What type of chlorine is used for drinking water?

So, we know that chlorine is a good thing in water, yet it can be a bad thing too. While we need chlorination for disinfecting drinking water and kill germs, it must be done at a level that is safe. There are three types of chlorine:

• Compressed Elemental Gas: Also referred to as Chlorine gas that is an amber color and is heavier than water. Different amounts are used based on the water quality that is to be treated.
• Sodium Hypochlorite Solution: This is where the chlorine odor comes from and has the compound of chlorine that makes it good as a disinfectant.
• Solid Calcium Hypochlorite: This is a hypochlorous acid that is extremely dangerous, causing corrosion if activated too strong, which is they use why little of it to for water chlorine removal.

Does boiling water remove chlorine?

Chlorine water boiling removed after fifteen-minutes of boiling, but not chloramine.  This is a faster proves than waiting for it to reach room temperature to achieve the same results. However, it is using a source of energy and the time it takes for the water to reach the boiling point may not be any faster than waiting for room temperature for the water chlorine removal process.

Does water filter remove chlorine?

The average chlorine filter will remove as much as 97% of chlorine, some high-grade performing filters remove more than 99%, but none remove 100% of water chlorine removal. Experts reassure us that the insignificant amount of chlorine left can’t be smelled, tasted, or affect our hair and skin.

How do you purify chlorinated water for drinking?

As we mentioned earlier, the water filter in a refrigerator water dispenser has a carbon-filled filter that will provide as much as 97% water chlorine removal and other organic compounds, odors, synthetic organic chemicals, odors, and tastes.  Somewhat new on the market is the premium five-stage filtration system. It works better at reducing more contaminates that the standard two-stage filtration systems.

Chlorine Is Good For Us – In Moderation

It is important to remember that we need some chlorine in our water today just as much, maybe than they did in 1744 Sweden. With the chemical output of factories and homes these days, wouldn’t you hate to know what would be in the water you bathed in, cooked with, and drank? However, water chlorine removal is just as important so that we don’t get overdosed with it either, as it can have ill effects, even deadly, if not used with caution. Call 800-633-8469 today for your water filtration installation in Leander, TX.

How is ozone generated for water treatment?

Ozone is produced when oxygen (O2) molecules are taken away from an energy source and put into oxygen atoms. These atoms then collide with the oxygen molecule to form a gas that is unstable (O3) which is what is used to disinfect wastewater.

What happens to ozone in water?

With ozone added to water a chain of reactions occurs, which is complex that involves radicals like hydroxyl (OH) which is stronger than ozone itself. Oxidation with molecular ozone is slower than oxidation with hydroxyl radicals which happens very fast.

How does ozone kill bacteria in water?

Ozone water treatment will oxidize organic materials inside bacterial membranes by weakening the cell wall leading to cell rupture. This will expose the cell to the environment which will ultimately cause the immediate death of the cell. The ozonation standard for killing most organisms is a three minute contact time of maintaining 0.3 ppm.

Is ozonated water healthy?

Ozone water treatment is healthy and shown to possess antibacterial effects. Direct inhalation of O3 is what’s dangerous with side-effects that emerge which is why in order to heighten both safety and effectiveness ozone dissolved in water.

Why do they put ozone in water?

In order to remove harmful microorganisms and to disinfect water, ozone water treatment can be implemented to mineral or spring waters. It can also be effective in removing flavors and odors as it breaks them down into oxygen which can improve taste and other aspects.

Ozone Water Treatment for Plants

Ozone water treatment for plants is often a good idea as they will increase the level of oxygen in the water. As oxygen-enriched water will ultimately feed the plant it’s development will be improved in growth and health.

How much ozone is used in water treatment?

There is a required amount of ozone is .44 mg ozone/mg Fe. With drinking water Hydrogen Sulfide (H2S) is often removed in order to make water have a better taste.

Is ozone treated water safe to drink?

Ozone water is safe to consume and it can also be used for pool and hot tubs. 

Ozone Water Purification for Swimming Pools

Ozone water treatment can be a viable alternative option when you’re looking for a disinfectant for your pool. It can be used to replace the bromine and chlorine disinfection chemicals. Ozone has the advantage of having the environment of the swimming pool increase dramatically.

Does ozone change pH water?

Ozone water treatment won’t affect the pH of water, it will instead oxidize the contaminants which are causing an adjusted pH.

Ozone Water Treatment for Hot Tubs

A hot tub ozonator is the device that’s typically used to generate and inject ozone gas into the spa water. What this will do is reduce the number of chemicals in the water as well as take away impurities in order to keep the water clear and conditions enjoyable.

How is ozone removed from water?

Ozone is removed from water by UV light which will quickly break or dissociate the oxygen bonds in the ozone molecule. With this UV energy ozone will be catalyzed into oxygen.

Contact A Professional For Assistance

If you’re looking to improve your water with ozone water treatment your local water treatment company will be able to provide you with the services that you need. It’s important to stay healthy and hydrated no matter the season, and with cleaner water, you’ll benefit from a better taste and mindset. With all of the options available for water treatment make sure to weigh them out to see what may work more optimally for your property. You may even be able to combine different water treatment and purification systems for heightened clean water. See what may be able to work for your property’s specifications with a professional. If ozone water treatment sounds right for you, go ahead and make the move for better water today.

If you’re interested in ozone water treatment in Leander, TX call 800-633-8469 with Ozone Pure Water!

One of the most important systems that run through a home is plumbing. Free water testing is valuable because it helps homeowners to understand more about the water quality that flows through their faucets. 

How to Test Water Quality

There are a number of different ways for the water in your home to be tested. One of these ways is by purchasing a water quality testing kit. Another way to test your drinking water is to get it tested at a laboratory that is accredited by the Department of Environmental Protection, also known by the acronym, DEP. There is a repository of DEP-accredited labs that are available on the Department of Environmental Protection website. Elements and pollutants that show up during water quality tests include chemicals, hardness, arsenic, metals, E. coli, nitrate, coliform bacteria, and lead or copper.

Drinking-Water Test Lab

In order for a laboratory to be approved to test the water by the EPA, they must follow a certain set of guidelines that must be met. For instance, laboratories must be certified by the state or the EPA in order to analyze drinking water samples for compliance monitoring. Laboratories must also successfully analyze proficiency testing (PT) examples at least once annually for each method. They must also analyze each method for the desired certification. The laboratory must also use the accepted methodology. Periodically, such laboratories must also pass on-site audits.

Water Tester

It’s important for all individuals to recognize that water is always at risk of being contaminated with harmful bacteria. People use water for a wide variety of purposes. Water is used for household tasks such as washing dishes and doing laundry. It’s also used for recreational purposes such as swimming. In each instance, water needs to be free of contaminants and safe. An appropriate water tester can comprehend over one hundred and seventy contaminants. Each of these contaminants must be eliminated in order for the water to be safe to drink.

Tap Water Test

If you pay a water bill, water is being purchased from the public water system. That means that the water is consistently monitored and found to be trustworthy. The results of your water quality tests are reported to the federal, state or tribal drinking authorities. As a matter of fact, the water company must notify homeowners when contaminants are found in the water. This is because contaminated water can cause illness or other serious issues. If, on the other hand, your water comes from a household well, you are primarily answerable for making sure that it is safe for consumption.

Who Does Free Water Testing

Are you wondering who performs free water testing in your area? Please feel free to review the following possible resources:

• A nearby certified and insured water testing company. Many companies offer to perform this service for free because it addresses the water quality situation directly. 
• An online water testing company. There are online water testing companies that will test your in-home water for hardness and water quality.

While you are researching your water testing options, you might as well start cataloging companies that you think would be suited to perform routine maintenance for your home. That includes roof repairs. If you need a flat roof installation or repair, now is the time to address those repairs.

Free Water Testing Kits for Schools

Luckily, there are water associations that provide free water quality test kits for schools. One such association is the Green Mountain Water Environment Association. The GMWEA provides one hundred basic testing kits to schools each year. These are distributed just in time for spring semester field-learning exercises.

Free Water Testing

As any scientist can confirm, the quality of your water is integral to your health. There are many different avenues for you to take if you would like free water testing. As previously mentioned, you could utilize a nearby water testing company or you could search online for a laboratory that is certified by the EPA. The most important thing for homeowners to focus on is finding a company that is as responsible and certified as possible. Please only use companies that are backed by official documentation.

Our company can help you with free water testing. Our staff at Ozone Pure Water are ready to take your phone call at 800-633-8469. Discover more about what a free water testing in Leander, TX can do for your home!

Iron Removal Water System vs Water Softener

Should you invest in an iron removal system and a water softener? That depends on a few things. You can start with water testing. These tests are often inexpensive and easy to complete, as well as providing fast results. If the well water you source from contains excessive amounts of iron and other mineral deposits, then yes, it may be a good idea to invest in both. However, if the deposits aren’t substantial, then you may be able to get away with one or the other. 

Water softeners help to reduce damage to your plumbing and other fixtures by removing traces of magnesium and iron from the water. Doing so prevents rust, corrosion, and hard water stains that you’ll often find in coffee pots and on shower doors. That in mind, water softeners can come with their own host of problems that may not make them worth the investment. Depending on your needs and your budget, you can decide what you want. For help with that, rely on Ozone Pure Water. We are the experts you can trust to offer you incredible services at affordable prices. 

Frequently Asked Questions

• What is the best iron removal water system?
  • There are several brands and options out there, but the best for removing iron would be a system that is specifically designed to do just that. Katolox makes a great filtration system that specifically removes iron from water well sources. 
• How do you remove iron from water?
  • This can be done with mechanical, or sediment filters, or with filters that are specifically designed to catch iron deposits in water. Either way, you’ll have filtered water that is clean and free from iron, chemicals, and more.
• Will a whole house filter remove iron?
  • Yes, there are many filtration systems on the market that will remove a whole host of things such as iron, magnesium, and more. These may not be as effective as a system that is purposefully removing iron, but they will get the job done.
• What type of filter removes iron from water?
  • Most water filtration systems actually remove dissolved ferrous iron through ion exchange. This filtration allows for the most removal and cleaning of well water into your home. 
• Can iron in water hurt you?
  • No, according to most sources, you could not drink enough water to see any toxic harm to your body. However, while iron doesn’t affect your health, it can affect your home, causing problems and damage. 

Where Is Tannic Acid Found?

Tannic acid is found on the twigs of some oak tree types in the nutgalls and is formed by insects.  It is removed from those twigs and then processed to be used as a flavoring agent in beverages and foods and as a medicine.

How Do You Detect Tannins?

When tannins are added to water, it turns a light yellow to a dark brown. Tannins are detected by taking a clear glass and filling it with water, setting it aside overnight.  The next morning, if the color has settled down to the bottom of the glass, then the discoloration is more likely to be from iron or manganese, it is not an indication of tannins being present.

Are Tannins Dangerous?

A fascinating kind of molecule, tannins are a natural by-product of a plant that is binding and full of proteins. Many foods that are consumed by humans are largely influenced by tannins as nutritive value. Historically, activated charcoal would be mixed with magnesium oxide and tannic acid as an antidote for poisoning.

It was thought that that combination worked better to absorb poisons than any other ingredients. Unfortunately, it would be discovered over time that the tannic acid was soaked by the activated charcoal, making it less effective.

Today though, tannic acid is used directly instead of combining it with any other substance. It is applied to directly to aid to stop bleeding and as an aid in healing things like:

• Bleeding
• Cold Sores
• Diaper Rash
• Fever Blister
• Heat Rash
• Ingrown Toenails
• Poison Ivy
• Receding or Spongy Gums
• Skin Rashes
• Sore Throat
• Sore Tonsils

What Does Tannic Acid Do to the Body?

The natural ingredients within tannic acid absorb things that are harmful and unnatural for the body, thus, having a protective consequence on the body, externally or internally. Above, we listed some of the external ways tannic acid is used on the body. Internally, tannic acid can help as well! Tannic acid has been used for cancer and helps with intestinal issues. However, tannic acid can absorb medications as well, thus, making them less effective.

What Are the Side Effects of Tannins?

While tannins are known to have positive effects on the body when the commercial form of them are ingested in the form of tannic acid in large amounts, it has been known to cause the following side effects:

• Liver Damage
• Nausea
• Stomach Irritation
• Vomiting

Additionally, when tannin is regularly consumed in high concentrations along with herbs, it has been linked to increased chances of nose or throat cancer developing. However, there have been positive health benefits from the anti-oxidizing of tannins, one being that blood pressure has been stabilized when consumed in moderation.

Overall, tannins and tannic acid summarized is that while it can be good for the human body, too much of a good thing can be harmful. The FDA has requested more studies be done on this substance before they take on their studies to determine the benefits and possible harm of this natural by-product.

Are Tannins and Tannic Acid the Same?

Tannic acid is a detailed form of tannin and frequently the two terms are incorrectly used in conversation interchangeably. For example, concerning black tea and green tea. Both of these contain tannin, but they do not contain tannic acid.

Because the terms have been misused so much and are included in articles together, the confusion has been compounded. The truth to this matter is that tannic acid is a poor definition of the composition and is not a suitable standard for any form of tannin analysis.

A short summarization is that tannins come from a complex chemical compound group and tannic acid is a commercial standard name. In the commercial format, it is frequently found in gallotanic acid. Tannic acid is decagalloyl, based on gallic acid in the polyphenol family and derived from glucosyl version (sugar). The tannins are from the polyphenol family as well in the form of flavonoid-based products in the polyphenol family.

As tannic acid is a natural by-product substance and is found in many beverages and foods, including water, it has proven not to be harmful to humans. It is added frequently, but when it comes to drinking water, caution is recommended.

As stated earlier, too much of a good thing can make it a bad thing. As such, if you notice a musky odor in your water or an unpleasant “dirty” taste to your water, it is wise to have the water tested for high levels of tannic acid. If in an area that is known for issues with water quality, a periodic check-up for your water would be as beneficial as having your HVAC system checked periodically, considered part of household maintenance. Looking for water purification for your home in Leander, TX? Call Ozone Pure Water today at 800-633-8469 for your needs!

While the pH of your pool is really important, there are other chemicals that are needed in your pool. What chemicals are needed to maintain a pool? If you have a pool, you will also need to test the alkalinity, calcium hardness, chlorine, and cyanuric acid. To test all four, you will need to use a complete test kit. When it comes to your alkalinity, the total alkalinity needs to be between 80 and 120 ppm. If it’s too low you will use an alkalinity increaser and a pH decreaser if the levels are too high. For calcium hardness, it needs to be between 180 and 220 ppm. Just adjust those levels when they are too low, you can use a calcium hardness increaser. Pool water has pretty high levels of calcium hardness, so getting them higher is usually not an issue. The levels of cyanuric acid need to be between 30 and 50 ppm, but they will usually be at zero when the pool has freshly filled water. To raise the levels, you will use add a stabilizer. After all of the chemical levels have been checked and added, you will need to raise the chlorine levels. The fastest way to do this is to shock the pool, which just means adding more chlorine. Of course, if you use other water treatment options like ozone, bromine, or salt water, there will be other ways to treat your new pool water. To ensure your pool water treatment is done correctly, it’s important to call a professional.

Pool Water Treatment Options

In order to keep your pool protected against bacteria and slime, you need a good water treatment option. When it comes to pool water treatment, you have a couple of options to choose from.

• Bromine: If you are allergic to chlorine, bromine is a great alternative to chlorine. You don’t have to test your pool as much when you use bromine and the water balance should pretty much stay the same for longer periods of time. However, it isn’t best at oxidizing water and it is more expensive.
• Chlorine: The most popular pool water treatment it chlorine. It has the ability to remove algae, sanitize your pool, as well as oxidize it, plus it is affordable. Some people don’t like to use chlorine because it can irritate their skin, has a strong smell, and causes red eyes.
• Ionizers: Using copper and silver, an ionizer uses a low-voltage DC current to send these types of metals into the pool water. You don’t have to use much chlorine with this pool water treatment, and it’s good at attracting germs and bacteria that can be removed from the filter. This water treatment is more expensive.
• Ozone: This type of treatment uses a machine that is installed to the filtration line. It will then place ozone gas to kill pathogens. They require little chlorine and they don’t use a lot of electricity.

What Happens If I Put Too Much Chlorine in My Pool?

When you add too much chlorine to your pool, it can irritate your skin and eyes and in serious cases, it can exacerbate asthma and irritate your lungs. What can I use to stabilize my pool? If you have put too much chlorine in your pool, stop adding chlorine to your pool and leave your pool uncovered so the sun will remove some of the chlorine.

How Do I Balance My Pool Water?

The way that you balance out your pool water is to test and adjust the
alkalinity, adjust the pH, regulate the calcium hardness, and then sanitize the pool with your preferred pool water treatment.

How Often Should You Treat Your Pool?